Wire Wrapping Heart Beaded Charms Bracelet DIY

As hot summer is approaching, you may need some jewelry crafts for summer time. Then you can see this beading bracelet I will share with you next. This is a wire heart bracelet and it is really suitable for holidays on beach. Let’s see the wire wrapping bracelet together~

Supplies you’ll need in making the DIY charms bracelet:
23mm Blue Lampwork Beads
10mm Blue Glass Beads
4mm Abacus Acrylic Beads
1.5mm Silver Aluminum Wire
Jump Rings
Twisted Chains
Eye Pins
0.3mm Jewelry Wire
Round Nose Plier
Side Cutting Plier
Long Nose Plier
Scissors

Step 1: Cut a piece of 1.5mm aluminum wire (with a length about 8cm), wrapping it into a heart shape with 2 small loops at the 2 ends, then pinch the bottom of the heart a little as pictured. Repeat to make another wire heart like the first one.

Step 2: Cut a piece of 0.3mm jewelry wire, add a 4mm acrylic bead to it and wrap the wire around the aluminum wire. Continue to wrap more colorful acrylic beads to the aluminum wire. Do the same steps for the other heart.
Step 3: Slide a blue lampwork bead to an eye pin, making a loop at the other end of the eye pin, and connect the 2 hearts with this lampwork bead.

Step 4: Slide a 10mm blue glass bead to 2 eye pins respectively, making a loop at the other end of the eye pins. Attach the 2 glass beads to the 2 hearts through jump rings.
Step 5: Cut 2 pieces of twisted chains, attach them with the 2 glass beads respectively, and then add a jump ring to one chain while add a lobster claw clasp to the other chain as pictured.

Done~

See this beaded heart bracelet, it is finished quickly. The blue lampwork bead just makes me feel the blue sea, and it looks fresh and clear! If you also like this DIY charms bracelet, just try to make one now! Have a wonderful day~